Industrial Recense has obtained DAU 18/109 and ETA 18/0345 for its Aisrec Reflex Prime thermal insulators.
The thermal insulation properties of AISREC REFLEX PRIME products are given by the presence of one or more low emissivity reflective surfaces (in this case, a reflective aluminum foil) together with the presence of one or more associated air layers, provided by a polyester or polyethylene foam and/or one or more layers of air bubbles formed with polyethylene foil.
The different layers of Aisrec Reflex products are sewn and joined by thermofusion (however, the outer layers are the result of thermofusion of an aluminum layer with an air bubble layer).
The best thermal performance is achieved when they are installed on site with one or two adjacent air chambers, watertight and with a minimum thickness of 20 mm. The insulators are bonded together with an aluminum adhesive tape to seal the layer.
DAU 18/109 is effective as of 10/05/2018.
The ETA (European Technical Assessment) is the European document that contains the technical assessment of the performance of a product that is not covered, partially or totally, by a harmonized technical specification. The ETA is elaborated by ITeC as OAT (Technical Assessment Body) and is approved in the context of EOTA (European Organisation for Technical Assessment).
ITeC has been an authorized body for non-standard and innovative product evolution within EOTA since 1996 and is designated as OAT under Regulation (EU) No. 305/2011 since March 2013, for all Product Areas foreseen therein.
